skip navigation

About Us

Home / About Stone Veneer

We freight to all over the world The best logistic company, FAST and SAFELY!

Technical Details

General
Description

Thin Flexible Stone Veneers are thin, lightweight, flexible stone material; they are so innovative that they can be applied to any surface or shape. You can create your own expression of style. Transform ordinary spaces with the look and touch of stone, without the difficulty and expense of traditional stonework. Our Thin Flexible Stone Veneers are a breakthrough in easy-to-work with, authentic surfacing technology.

Standard
Sheet Size

1220 mm x 610 mm / 4 ft. x 2 ft. / 48 inches x 24 inches, larger & smaller sizes are available on request

Standard
Weight Each
Sheet

Approximate 1.50 Kilograms with thickness of 1 mm to 1.50 mm (approximately 1.2 to 1.6 kilograms per square meter (approx 0.25 gms per sq foot).

Standard
Thickness

1 mm to 1.50 mm

Storage

Thin Flexible Stone Veneer sheets should be stored face-up in a cool, dry area and in a completely supported flat position. Do not store on edge or coiled.

Special

Do not expose to direct flame.

Gluing

The backside of the Thin Flexible Stone Veneers are treated with polyester backing. It is now possible to glue these sheets with common dispersion glues, hot melts and PUR (Polyurethane Reactive) glues onto a variety of carrier materials such as wood, fiber, cement boards and gypsum panels. For water resistant applications we recommend to apply a one or two component PUR adhesive (without the special fleece) onto the polyester backside.

Adhesives

  • Titebond "GREEN Choice" heavy duty construction adhesive.
  • Titebond "FAST GRAB" SOLVENT FREE FRP adhesive.
  • Premixed grout and tile adhesive.
  • Acrylic copolymer based tile adhesive.
  • Polyurethane wood glues and PU construction grade adhesives.
  • Wood, parquet, and outdoor carpet adhesives.
  • Highly modified thin-set. Use only after testing. Not recommended where high adhesion is required.
  • Thick latex or acrylic latex type tile adhesive. Use only where air drying can take place. Not recommended for exterior applications.
  • Epoxy.
  • Silicone (with primer only)
  • Construction grade multi-purpose adhesive, Liquid Nails type.
  • Polyester resin with filler.
  • Pressing

    Our Thin Flexible Stone Veneer has a natural, rough stone surface with a variation of up to 2 mm. To compensate for tolerance during the pressing in the press, we recommend a silicone membrane to compensate for the height variations of Thin Flexible Stone Veneer Stone. During pressing, it is important to ensure the compression pressure is carefully selected. The pressing time depends upon the chosen glue or adhesive, substrate and temperature.

    Cutting
    Tools

    Flexible Stone Veneer has thin stone layers and can be cut with standard saws, equipped with a special laminate blade. Due to the thin stone layer and the fiber cover on the backside, the down time of the saw is reduced. If Flexible Stone Veneer has been applied to both sides of a panel, it is recommended that the reverse side be scored to avoid splintering. Routing the panels is also a quick solution. For bigger production runs it is recommended to use diamond tools. Commonly used machine cutting speeds in the woodworking industry cannot be exceeded. Dull tools, excessive speed or feed rates will lead to heat from friction, which cause melting of the polyester backing. Flexible Stone Veneer can also be cut with standard long nose metal scissors, water-cooled saw with a diamond blade, circular saws with a carbide blade, masonry disc or metal shears. The cutting of curves works best with long nose shears or on a CNC (Computer Numerical Control) cutting machine.

    Surface
    treatment
    of Flexible
    Stone Veneer

    You know Flexible Stone Veneer is a real stone and it's surface is porous, and it has the natural look of slate & quartzite and includes the colours of various minerals. We recommend a sealer to protect this natural look of Flexible Stone Veneer. After installation, we should apply a protective coating or sealer. Flexible Stone Veneers' surface protected by a process of stone surface protection – for example "super mat" or "silk mat" protection for high stress surfaces. These coatings or sealings are applied lightly with a brush, rag or sponge. Flame proofing is also possible by the application of a special chemical on Flexible Stone Veneer Sheets.

    Technical &
    Chemical
    Analysis

    Thin Flexible Stone Veneers are thin, lightweight, flexible stone material; they are so innovative that they can be applied to any surface or shape. You can create your own expression of style. Transform ordinary spaces with the look and touch of stone, without the difficulty and expense of traditional stonework. Our Thin Flexible Stone Veneers are a breakthrough in easy-to-work with, authentic surfacing technology.

    Standard Sheet Size :: 1220 mm x 610 mm / 4 ft. x 2 ft. / 48 inches x 24 inches, larger & smaller sizes are available on request.

    Standard Weight Each Sheet :: Approximate 1.50 Kilograms with thickness of 1 mm to 1.50 mm (approximately 1.2 to 1.6 kilograms per square meter (approx 0.25 gms per sq foot).

    Standard Thickness :: 1 mm to 1.50 mm

    Storage :: Thin Flexible Stone Veneer sheets should be stored face-up in a cool, dry area and in a completely supported flat position. Do not store on edge or coiled.

    Special :: Do not expose to direct flame.

    Gluing :: The backside of the Thin Flexible Stone Veneers are treated with polyester backing. It is now possible to glue these sheets with common dispersion glues, hot melts and PUR (Polyurethane Reactive) glues onto a variety of carrier materials such as wood, fiber, cement boards and gypsum panels. For water resistant applications we recommend to apply a one or two component PUR adhesive (without the special fleece) onto the polyester backside.

    Adhesives

    Titebond "GREEN Choice" heavy duty construction adhesive.

    Titebond "FAST GRAB" SOLVENT FREE FRP adhesive.

    Premixed grout and tile adhesive.

    Acrylic copolymer based tile adhesive.

    Polyurethane wood glues and PU construction grade adhesives.

    Wood, parquet, and outdoor carpet adhesives.

    Highly modified thin-set. Use only after testing. Not recommended where high adhesion is required.

    Thick latex or acrylic latex type tile adhesive. Use only where air drying can take place. Not recommended for exterior applications.

    Epoxy.

    Silicone (with primer only)

    Construction grade multi-purpose adhesive, Liquid Nails type.

    Polyester resin with filler.

    Pressing :: Our Thin Flexible Stone Veneer has a natural, rough stone surface with a variation of up to 2 mm. To compensate for tolerance during the pressing in the press, we recommend a silicone membrane to compensate for the height variations of Thin Flexible Stone Veneer Stone. During pressing, it is important to ensure the compression pressure is carefully selected. The pressing time depends upon the chosen glue or adhesive, substrate and temperature.

    Cutting Tools ::Flexible Stone Veneer has thin stone layers and can be cut with standard saws, equipped with a special laminate blade. Due to the thin stone layer and the fiber cover on the backside, the down time of the saw is reduced. If Flexible Stone Veneer has been applied to both sides of a panel, it is recommended that the reverse side be scored to avoid splintering. Routing the panels is also a quick solution. For bigger production runs it is recommended to use diamond tools. Commonly used machine cutting speeds in the woodworking industry cannot be exceeded. Dull tools, excessive speed or feed rates will lead to heat from friction, which cause melting of the polyester backing. Flexible Stone Veneer can also be cut with standard long nose metal scissors, water-cooled saw with a diamond blade, circular saws with a carbide blade, masonry disc or metal shears. The cutting of curves works best with long nose shears or on a CNC (Computer Numerical Control) cutting machine.

    Surface treatment of Flexible Stone Veneer ::You know Flexible Stone Veneer is a real stone and it's surface is porous, and it has the natural look of slate & quartzite and includes the colours of various minerals. We recommend a sealer to protect this natural look of Flexible Stone Veneer. After installation, we should apply a protective coating or sealer. Flexible Stone Veneers' surface protected by a process of stone surface protection – for example "super mat" or "silk mat" protection for high stress surfaces. These coatings or sealings are applied lightly with a brush, rag or sponge. Flame proofing is also possible by the application of a special chemical on Flexible Stone Veneer Sheets.

    Technical & Chemical Analysis ::Thin Flexible Stone Veneer Sheets made by Quartzite Stone

    Flexible Quartzite Stone Veneer
         
    TEST RESULTS PROTOCOL
    Water Absorption, % by wt 3.52 ASTM C-21
    Thermal Expansion (mm) (Change in thickness) 0.06 IS-2046 Guidelines
    Density, kg/m2 1.84 IS: 12866-1989 Guidelines
    Temprature Limits ( °C ) 190. 0 IS-2046 Guidelines
    Fire Behaviour (mm/mm) (Burn Rate) 142. 4 IS:15061 Guideline
    Abrasion Resistance (mm) Avg. Wear 0.9 IS: 9162-1979
    Individual Wear (max.) 1  
    Weight Per Sqare Meter (lbs) 4.1 IS: 12866-1966 Guidelines
    Back side Glass fiber fabric in Poleyster resin matrix  
         
    Toxic Element (EN-71 Part-3)
    (Migration of Certain Element )
         
    ELEMENTS REQUIREMENT (mg / kg) MAX RESULTS (MG/KG)
         
    Antimony ( as Sb ) 60 < 5.0
    Arsenic (as As ) 25 < 5.0
    Barium ( as Ba ) 1000 10. 0
    Cadmium ( as Cd ) 75 <5.0
    Chromium ( as Cr ) 60 <5.0
    Lead ( as Pb ) 90 12. 0
    Mercury ( as Hg ) 60 <5.0
    Selenium ( as Se ) 500 < 5.0< /td>

    Protocal. As per method en-71 Pt-3-1995 for safety of toys ( Migration of Certain elements method )

    NOTE :- The sample conforms to requirment of EN-Pt-3+A, :2000

    Applications :: Thin Flexible Stone Veneer is ideal for

  • Furniture production
  • Curved surfaces and columns
  • Metal
  • Lacquered surfaces
  • Concrete
  • Wood
  • Plywood
  • Particle board
  • Ceramic tiles
  • Drywall
  • MDF (Medium Density Fibreboard)
  • Doors
  • Furniture
  • Exhibition walls
  • Displays and floors
  • Automotive industry
  • Rail, yachts, retail shops
  • Offices and elevators etc.
  • Applications

    Thin Flexible Stone Veneer is ideal for

  • Furniture production
  • Curved surfaces and columns
  • Metal
  • Lacquered surfaces
  • Concrete
  • Wood
  • Plywood
  • Particle board
  • Ceramic tiles
  • Drywall
  • MDF (Medium Density Fibreboard)
  • Doors
  • Furniture
  • Exhibition walls
  • Displays and floors
  • Automotive industry
  • Rail, yachts, retail shops
  • Offices and elevators etc
  • Clients Testimonial

    Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book.

    22Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book.